What does a Subaru engine teardown look like? Pretty similar
to this!
This was a JDM WRX engine that a customer brought to us for
a full engine teardown to diagnose what the issue was. Our tech started by pulling
the heads and dis-assembling them to inspect each part for wear and issues. We
use Subaru specs to measure tolerances to verify everything is where it needs
to be and working properly. We also inspect bearing surfaces for any abnormal
wear, pitting or scoring, which would indicate bad oiling and require polishing
or replacement.
Next up is the block. The block is town down to individual
components and each one is inspected for any abnormal signs of wear. Each piece
is laid out in order, bolts and studs are labeled and kept aside. Most stock
parts can be re-used if desired, so keeping everything labeled and sorted is important.
This particular engine had a bad rod bearing, which resulted
in the dreaded “rod knock”. We measured the tolerances on the road and
bearing, as well as the crank, and it was determined that the rod was not salvageable
and at minimum a new rod and bearing would be needed for a proper rebuild.
Circuit Motorsports is a Performance Auto shop located in
Orlando, FL . We specialize in Performance parts and upgrades in suspension,
exhaust, intake, forced induction, performance driveline and tuning. We are
also Subaru Specialists with a trained and certified Subaru Tech on staff. If
you are looking to get your engine diagnosed because of an issue, or you are looking
to build your engine for more power, we are here to make that happen!
subaru shop orlando florida
subaru engine builds orlando
subaru service orlando
subaru work orlando
It arduous to search out educated people on this topic, but you sound like you realize what you are talking about! Thanks Used Mini Cooper Parts
ReplyDeleteI found your this post while searching for some related information on blog search...Its a good post..keep posting and update the information. OMC sterndrive parts
ReplyDelete